The Open Systems Interconnection Reference Model (OSI Reference Model or OSI Model for short) is a layered, abstract description for communications and computer network protocol design, developed as part of the Open Systems Interconnection initiative. It is also called the OSI seven layer model.
Layer 7: Application Layer
The Application layer provides a means for the user to access information on the network through an application. This layer is the main interface for the user(s) to interact with the application and therefore the network. Some examples of application layer protocols include Telnet, File Transfer Protocol (FTP), Simple Mail Transfer Protocol (SMTP) and Hypertext Transfer Protocol (HTTP).
Layer 6: Presentation Layer
The Presentation layer transforms data to provide a standard interface for the Application object and other data structures into and out of, e.g., XML.
Layer 5: Session Layer
The Session layer controls the dialogues (sessions) between computers. It establishes, manages and terminates the connections between the local and remote application. It provides for either duplex or half-duplex operation and establishes checkpointing, adjournment, termination, and restart procedures. The OSI model made this layer responsible for "graceful close" of sessions, which is a property of TCP, and also for session checkpointing and recovery, which is not usually used in the Internet protocols suite.
Layer 4: Transport Layer
The Transport layer provides transparent transfer of data between end users, thus relieving the upper layers from any concern while providing reliable data transfer. The transport layer controls the reliability of a given link through flow control, segmentation/desegmentation, and error control. Some protocols are state and connection oriented. This means that the transport layer can keep track of the packets and retransmit those that fail. The best known example of a layer 4 protocol is the Transmission Control Protocol (TCP). The transport layer is the layer that converts messages into TCP segments or User Datagram Protocol (UDP), Stream Control Transmission Protocol (SCTP), etc. packets.
Layer 3: Network Layer
The Network layer provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks while maintaining the quality of service requested by the Transport layer. The Network layer performs network routing functions, and might also perform segmentation/desegmentation, and report delivery errors. Routers operate at this layer—sending data throughout the extended network and making the Internet possible (there also exist layer 3 (or IP) switches). This is a logical addressing scheme – values are chosen by the network engineer. The addressing scheme is hierarchical. The best known example of a layer 3 protocol is the Internet Protocol (IP).
Layer 2: Data Link Layer
The Data Link layer provides the functional and procedural means to transfer data between network entities and to detect and possibly correct errors that may occur in the Physical layer. The addressing scheme is physical which means that the addresses (MAC address) are typically hard-coded into the network cards at the time of manufacture. Some network interface cards support locally administrered (defined) MAC addresses. The addressing scheme is flat. Note: The best known example of this is Ethernet. Other examples of data link protocols are HDLC and ADCCP for point-to-point or packet-switched networks and Aloha for local area networks. On IEEE 802 local area networks, and some non-IEEE 802 networks such as FDDI, this layer may be split into a Media Access Control (MAC) layer and the IEEE 802.2 Logical Link Control (LLC) layer. It arranges bits from physical layer into logical chunks of data, known as frames
This is the layer at which the bridges and switches operate. Connectivity is provided only among locally attached network nodes forming layer 2 domains for unicast or broadcast forwarding. Other protocols may be imposed on the data frames to create tunnels and logically separated layer 2 forwarding domains.
Layer 1: Physical Layer
The Physical layer defines all the electrical and physical specifications for devices. This includes the layout of pins, voltages, and cable specifications. Hubs, repeaters, network adapters and Host Bus Adapters (HBAs used in Storage Area Networks) are physical-layer devices. The major functions and services performed by the physical layer are:
Establishment and termination of a connection to a communications medium.
Participation in the process whereby the communication resources are effectively shared among multiple users. For example, contention resolution and flow control.
Modulation, or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. These are signals operating over the physical cabling (such as copper and fiber optic) or over a radio link.
Parallel SCSI buses operate in this layer. Various physical-layer Ethernet standards are also in this layer; Ethernet incorporates both this layer and the data-link layer. The same applies to other local-area networks, such as Token ring, FDDI, and IEEE 802.11..
|